Labconco FreeZone 6 Liter -84 C Console Freeze Dryer with Stoppering Tray Dryer, Corrosion-Resistant Collector, Purge Valve, 115 V
FreeZone 6 Liter Console Freeze Dryers with Stoppering Tray Dryers are designed for lyophilizing moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum pump (sold separately).
- Upright stainless steel collector coil capable of holding 6 L of ice before defrosting. Stainless steel collector lid, 3/4" thick, has neoprene gasket
- Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window
- Clear acrylic chamber lid, 3/4" thick, with neoprene gasket
- Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents
- Full color, 5" capacitive touch screen with Lyo-Works™ OS
- Hot gas defrost with auto shut off at +60 °C (+140 °F)
- On/standby switch
- Moisture sensor that prevents refrigeration or vacuum start-up when moisture is detected in the drain line
- Vacuum control valve that maintains vacuum level set point
- Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart
- Side-mounted USB port and rear-mounted Ethernet connection
- Front-mounted, quick-disconnect drain hose fitting and side-mounted lanyard with hose connector. 18", 1/4" ID silicone tubing and clamp included
- Internal electrical receptacle for vacuum pump connection
- 3-wire electrical cord with plug
- 3/4" OD vacuum connection, 36" of 3/4" ID vacuum hose and two clamps
- Upright stainless steel collector coil capable of holding 6 L of ice before defrosting. Stainless steel collector lid, 3/4" thick, has neoprene gasket
- Console cabinet with interior space for vacuum pump (sold separately) and two-piece, removable front panel with viewing window
- Clear acrylic chamber lid, 3/4" thick, with neoprene gasket
- Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents
- Full color, 5" capacitive touch screen with Lyo-Works™ OS
- Hot gas defrost with auto shut off at +60 °C (+140 °F)
- On/standby switch
- Moisture sensor that prevents refrigeration or vacuum start-up when moisture is detected in the drain line
- Vacuum control valve that maintains vacuum level set point
- Vacuum break valve that bleeds air into the system when power to the freeze dryer or vacuum pump is shut off. If a power outage less than approximately 5 minutes occurs, the freeze dryer will restart and the refrigeration and vacuum system will resume operation once power is restored. If the power failure is more than approximately 5 minutes and the collector warms above safe limits, the freeze dryer will not automatically restart
- Side-mounted USB port and rear-mounted Ethernet connection
- Front-mounted, quick-disconnect drain hose fitting and side-mounted lanyard with hose connector. 18", 1/4" ID silicone tubing and clamp included
- Internal electrical receptacle for vacuum pump connection
- 3-wire electrical cord with plug
- 3/4" OD vacuum connection, 36" of 3/4" ID vacuum hose and two clamps